This QA Terms and Conditions page is kept up-to-date with the most current quality information. If you have a purchase order that pre-dates these notes, please see the following table.

Historical Quality Terms and Conditions - All Sites

 

A Rev. Date General Requirements F Rev. Date Inspection
A01 11/04/11 General Requirements Redmond F01 04/06/20 First Article Inspection Verification
A02 04/12/11 General Requirements Sacramento F01 09/25/15 First Article Inspection Verification
A03 06/23/09 General Requirements Aerojet East F02 02/10/20 First Article Inspection Report (FAIR)
A05 05/23/13 General Requirements All Suppliers F02 11/14/19 First Article Inspection Report (FAIR)
AR1 12/06/23 Quality Management Systems - Requirements for Aviation, Space and
Defense Organizations (AS9100) and General Requirements		 F02 09/25/15 First Article Inspection Report (FAIR)
AR1 03/24/23 Quality Management Systems - Requirements for Aviation, Space and
Defense Organizations (AS9100) and General Requirements		 F02 11/20/08 First Article Inspection Report (FAIR)
AR1 08/22/22 Quality Management Systems - Requirements for Aviation, Space and
Defense Organizations (AS9100) and General Requirements		 F03 07/13/12 Source Inspection
AR1 07/15/22 Quality Management Systems - Requirements for Aviation, Space and
Defense Organizations (AS9100) and General Requirements		 F04 11/05/08 Government Source Inspection
AR1 05/04/22 Quality Management Systems - Requirements for Aviation, Space and
Defense Organizations (AS9100) and General Requirements		 F06 09/25/15 Sampling Inspection
AR1 04/28/22 Quality Management Systems - Requirements for Aviation, Space and
Defense Organizations (AS9100) and General Requirements		 F07 11/14/19 FAI_Plan Prior to Shipment
AR1 04/18/22 Quality Management Systems - Requirements for Aviation, Space and
Defense Organizations (AS9100) and General Requirements		 F07 09/25/15 FAI_Plan Prior to Shipment
AR1 07/06/21 Quality Management Systems - Requirements for Aviation, Space and
Defense Organizations (AS9100) and General Requirements		 F09 06/02/10 Supplier Documentation - Aerojet Prior Approval
AR1 05/25/21 Quality Management Systems - Requirements for Aviation, Space and
Defense Organizations (AS9100) and General Requirements		 G Rev. Date Testing
AR1 12/18/20 Quality Management Systems - Requirements for Aviation, Space and
Defense Organizations (AS9100) and General Requirements		 G01 10/11/08 Test Coupons - Supplier
AR1 12/04/20 Quality Management Systems - Requirements for Aviation, Space and
Defense Organizations (AS9100) and General Requirements		 G02 10/11/08 Test Coupons - Aerojet
AR1 08/14/20 Quality Management Systems - Requirements for Aviation, Space and
Defense Organizations (AS9100) and General Requirements		 G04 10/23/08 Chemical Test Actual
AR1 11/14/19 Quality Management Systems - Requirements for Aviation, Space and
Defense Organizations (AS9100) and General Requirements		 G05 10/23/08 Physical Test Actual
AR1 08/29/18 Quality Management Systems - Requirements for Aviation, Space and
Defense Organizations (AS9100) and General Requirements		 G06 10/11/08 Functional Test
AR1 04/20/18 Quality Management Systems - Requirements for Aviation, Space and
Defense Organizations (AS9100) and General Requirements		 G07 10/23/08 Pressure or Leak Test
AR1 03/11/16 Quality Management Systems - Requirements for Aviation, Space and
Defense Organizations (AS9100) and General Requirements		 G08 10/11/08 Non-Destructive Test
AR1 09/24/15 Quality Management Systems - Requirements for Aviation, Space and
Defense Organizations (AS9100) and General Requirements		 G09 10/23/08 Process Sample Evaluation Test
AR1 09/09/15 Quality Management Systems - Requirements for Aviation, Space and
Defense Organizations (AS9100) and General Requirements		 G10 10/11/08 Metallurgical Test
AR1 12/15/14 Quality Management Systems - Requirements for Aviation, Space and
Defense Organizations (AS9100) and General Requirements		 G12 10/23/08 Chemical Test Typical
AR2 06/07/23 Quality Management Systems – Aerospace Requirements for Distributors G13 10/23/08 Physical Test Typical
AR2 07/06/21 Quality Management Systems – Aerospace Requirements for Distributors G14 10/11/08 Electrical Test
AR2 11/14/19 Quality Management Systems – Aerospace Requirements for Distributors G15 10/11/08 Destructive Physical Analysis Test
AR2 04/20/18 Quality Management Systems – Aerospace Requirements for Distributors G17 10/11/08 X Ray Test
AR2 09/25/15 Quality Management Systems – Aerospace Requirements for Distributors G18 07/24/20 Acceptance Test
AR2 04/06/15 Quality Management Systems – Aerospace Requirements for Distributors G18 10/11/08 Acceptance Test
AR3 04/20/18 Inspection and Test Quality System (AS9003) and General Requirements G20 10/30/20 Supplier Inspection Test Data Report
AR3 09/25/15 Inspection and Test Quality System (AS9003) and General Requirements G20 11/14/19 Supplier Inspection Test Data Report
AR3 04/06/15 Inspection and Test Quality System (AS9003) and General Requirements G20 10/14/08 Supplier Inspection Test Data Report
B Rev. Date Quality Management Systems G21 11/05/08 Test Failure Report Control
B01 04/07/10 Quality Systems AS9100 H Rev. Date Packaging/Identification
B02 04/07/10 Quality Systems ISO9001 H01 11/06/08 General Packaging
B03 04/08/10 Quality Systems AS9003 H03 10/14/08 O-Ring Packaging
B05 11/05/08 Aerojet Approved Quality System H04 11/14/19 Bulk Rubber Insulation
B06 11/05/08 Calibration System H04 11/10/08 Bulk Rubber Insulation
B07 12/22/08 Material Integrity System (MIS) H05 11/10/08 Individual Packaging
B08 11/05/08 Distributors H06 11/10/08 Special Handling
B09 11/05/08 Configuration Changes H07 11/10/08 Hazardous Material and Explosives
B10 04/12/11 No Change Policy H08 11/06/17 Ammunition Cards
B11 11/05/08 Software Control I Rev. Date Electronics
C Rev. Date Process Control I02 10/28/08 Static Sensitive Material – ANSI/ESD-S20.20
C01 10/23/08 FOD_FOE I03 4/27/09 Tin Content (Refer to Q507.)
C02 11/20/19 Lockheed Martin Approval I04 11/14/19 Soldering J-STD-001
C02 03/16/16 Lockheed Martin Approval I04 10/14/08 Soldering J-STD-001
C03 09/25/15 Supplier Special Process Control I08 10/28/08 Plastic Encapsulated Devices
C04 09/25/15 Supplier Subtier Special Process Control I09 09/06/19 Solder Composition
C05 11/14/19 Government Qualified Products List I10 10/15/08 Rigid PWB Manufacture
C05 02/26/18 Government Qualified Products List I12 10/14/08 Microcircuit Manufacture
C05 10/26/08 Government Qualified Products List I14 10/14/08 Panel Verification
C06 10/28/08 X Ray Inspection Plan I15 11/14/19 Soldering J-STD-001 Space
C07 09/25/15 Process Mapping/Manufacturing Planning I15 11/06/08 Soldering J-STD-001 Space
C08 09/25/15 Statistical Process Control I16 11/12/08 OEM_Authorized Distributor Certifications
C09 09/25/15 Non-Destructive Evaluation I17 03/27/13 Recognized Source
C10 10/01/08 No Glass Beads I18 05/25/11 Data Package Requirements for Electronic Components
C12 11/14/19 Weld Schedule I19 07/20/15 Date Code 24 Months
C12 10/11/08 Weld Schedule J Rev. Date Electronics
C15 11/14/19 Product and Process Control Plan (PPCP) J01 09/22/08 Record Retention 10 Yrs
C15 09/25/15 Product and Process Control Plan (PPCP) J02 09/22/08 Record Retention 15 Yrs
C15 11/05/08 Product and Process Control Plan (PPCP) J04 11/14/19 As-Built Configuration
C16 11/05/08 Aerojet Furnished Materials/Tooling Q Rev. Date Quality Clauses
C17 11/05/08 Aerojet Approval of Tooling Q019 08/22/22 Special Process Approved Processor Source - with Deliverable Documentation
C18 11/13/08 GIDEP Participation Q078 11/14/19 Electronic Quality Documentation Package Supplier Portal
C19 11/13/08 No Halogenated Solvents Q210 11/14/19 Supplier Designed Drawing Request
C21 05/25/11 Single Lot Date Code Required Q212 11/14/19 Commercial Material Certification Identification
C23 10/10/13 Silver Plated Copper Corrosion (Red Plague) Q217C 11/14/19 Hazardous Materials Management
D Rev. Date Traceability Q218C 10/18/23 Metallic-Materials Acceptance Testing
D01 10/31/08 Supplier Assigned Serial Numbers Q219 05/20/19 Material Review (MR) Record(s): Nonconformance Report (NCR) documents
D02 10/31/08 Aerojet Assigned Serial Numbers Q237 04/14/20 Requirements for Printed Wiring Boards/Flex Circuits
D03 11/06/08 Traceability to Raw Materials Q239C 11/14/19 Non-Metallic Materials Acceptance Testing – Los Angeles
D05 11/13/08 Material/Component Traceability Q246 12/04/17 Serialization and Identification (MIL-STD-1189)
E Rev. Date Certification Q247 11/14/19 Measuring and Test Equipment (M&TE) 10:1 or 4:1
E01 10/29/13 Certificate of Conformance Q260 07/09/20 First Article Inspection with Compliance Matrix (CM) and Product Line Validation (PLV)
E02 11/14/19 Stock Item Certification Q260 05/04/20 First Article Inspection with Compliance Matrix (CM) and Product Line Validation (PLV)
E02 11/06/08 Stock Item Certification Q260 04/24/20 First Article Inspection with Compliance Matrix (CM) and Product Line Validation (PLV)
E03 11/14/19 Shelf Life Requirements Q260 02/13/20 Compliance Matrix (CM) and Product Line Validation (PLV)
E03 11/06/08 Shelf Life Requirements Q261 07/09/20 First Article Inspection (FAI) with Compliance Matrix (CM)
E04 11/06/08 Temperature Sensitivity, rev. 2 Q261 06/22/20 First Article Inspection with Compliance Matrix (CM) and Product Line Validation (PLV)
E04 11/06/08 Temperature Sensitivity, rev. 0 Q261 04/24/20 First Article Inspection (FAI) with Compliance Matrix (CM)
E05 11/06/08 Special Process Approval and Certification Q261 02/13/20 Compliance Matrix (CM)
E06 11/13/08 Calibration Certification Q405 11/14/19 NonDestructive Evaluation Processes
E09 11/06/08 Raw Material Specifications Q507 11/14/19 Tin Content
E10 11/06/08 Special Process Certification      
E11 11/06/08 Special Process Approvals - Nadcap Only      
E12 01/04/16 Special Process Approval      

Click here for the current QA Terms and Conditions page.